Ms-systems FMC8 Bedienungsanleitung PDF herunterladen

M&S Systems 800.421.1587 www.mssystems.com

NR8M/FMC8

SPEAKERS

INSTALLATION INSTRUCTIONS

NR8M/FMC8 SPEAKERS

PLEASE READ AND UNDERSTAND THESE INSTRUCTIONS COMPLETELY BEFORE CUTTING ANY WALL MATERIAL.

Tools Required: Phillips Screwdriver, Wire Cutters/Strippers, Drywall Saw and Measuring Tape

Location: Careful consideration must be given to the speaker's location.

CONGRATULATIONS!

Your purchase of an M&S music and communications system is an investment that will provide years of enjoyment and

service for your customer

M&S audio products are backed with more than 50 years of experience in the design and manufacture of precision

acoustical equipment for the home. To ensure that your customer receives the high-quality music and voice reproduction

that the system is designed to deliver, it is important that each step of the installation be done carefully. If you

follow the step-by-step illustrated instructions below, the result will be a successful professional-quality installation. In the

event you need troubleshooting assistance, please call our technical staff at 1-800-366-9422.

Step 1 Determine speaker location and mark your plans for future

reference. These speakers DO NOT use mounting rings.

Each speaker should be mounted at least 2' from the walls,

if ceiling mounted or at least 2' from the ceiling, if wall

mounted. DO NOT mount speakers in outside walls.

Step 2 Run a 16 gauge 2 conductor cable, such as MS16X5 for the

SA8/ SACS10, or a MS2XSC for the NR8M/FMC8, from the

volume control to the speaker location. Be sure that you

secure the wire (DO NOT USE STAPLES) and leave enough

wire for the speaker connection.

Step 3 For speakers being installed in ceiling applications, some

type of protection will be required for the back of the speaker

if blown insulation is used. The following is a partial list of

ways to protect the speaker:

• Use a piece of wood that will cover at least 3' on either side

of the speaker opening. The ends may need to be partially

closed to keep the blown insulation from reaching the

speaker, however, a gap of 2" at each end is better than a

sealed box.

• Use a piece of bat insulation at least 3" thick over the back

of the speaker. This insulation should not have a backing or

if it does, the backing must be installed facing away from

the speaker.

• Use a fine screen mesh to cover the back of the speaker to

protect against bulk type insulation materials. This will not

work with an insulation containing a fine powder.

INSTALLATION FOR NEW-CONSTRUCTION (ROUGH-IN):

☞ DO NOT Install speakers in return air ducts.

☞ DO NOT Install speakers in outside walls.

☞ DO NOT Install speakers in stud cavities with other 120/240V appliances.

☞ DO NOT Install speakers in stud cavities containing plumbing

☞ DO NOT Install speakers within 18” of dimmers, fluorescent light fixtures,

security wiring and other control wiring.

☞ DO NOT Install speakers within 2’ of room corners.

Location DO NOT’s

PRINTER’S INSTRUCTIONS:

INSTR,INSTL,NR8M/FMC8 - LINEAR P/N: 115811 D - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.500” X 11.000” - SCALE: 1-1 - SIDE 1 OF 2

1 2

Inhaltsverzeichnis

Seite 1 - SPEAKERS

M&S Systems 800.421.1587 www.mssystems.comNR8M/FMC8 SPEAKERSINSTALLATION INSTRUCTIONS NR8M/FMC8 SPEAKERSPLEASE READ AND UNDERSTAND THESE I

Seite 2 - FIGURE 2

Step 1 Determine speaker location and mark your plans for future reference. These speakers DO NOT use mounting rings. Cut a 9 3/8" diam

Verwandte Modelle: NR8M

Kommentare zu diesen Handbüchern

Keine Kommentare

Ms-systems FMC8 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Akustik Ms-systems FMC8 herunter. M&S Systems FMC8 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: NR8M

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Akustik Ms-systems FMC8