Ms-systems CHIME MC3 Bedienungsanleitung PDF herunterladen (Seite 1)

INSTALLATION INSTRUCTIONS

for Chime Models MC3 and MC8

NOTE: These chimes are used with series DMC1 and DMC3-4 MASTER UNITS.

1. Snap the Chime Board onto the 4 plastic standoffs in the wallhousing. See

ﬁgure 1.

2. BEFORE APPLYING POWER TO MASTER UNIT, plug chime connector into

back of master unit at the location indicated by the printing on the circuit board.

3. AFTER SYSTEM INSTALLATION IS COMPLETE apply power and adjust

the chime volume to desired level. The volume will increase in the clockwise

direction. Make sure that all intercom speaker volume controls are turned to

their maximum position before making adjustments.

115715 F

PRINTER’S INSTRUCTIONS:

INSTR,INSTL,MC3/MC8 - LINEAR P/N: 115715 F - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.500” X 11.000” - SCALE: 1-1 - SIDE 1 OF 2

1 2

INSTALLATION INSTRUCTIONSfor Chime Models MC3 and MC8NOTE: These chimes are used with series DMC1 and DMC3-4 MASTER UNITS.1. Snap the Chime Board

Figure 1PRINTER’S INSTRUCTIONS:INSTR,INSTL,MC3/MC8 - LINEAR P/N: 115715 F - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.500” X 11.000” - SCALE:

Verwandte Modelle: CHIME MC8

Keine Kommentare